Measurement Type
Enter site dimensions and front bearing.
Upload a plan, confirm the Smart Boundary and set North.
Choose how you want to provide the measurements. Only the related options are shown below.
Plot setup
Start with the direction of the front/road side, then enter the required plot measurements.
* Required
1 Set the front direction
Stand near the centre of the front/road boundary and face straight outward, away from the plot. The compass direction you face is the front outward bearing.
For Four boundary lengths + bearings, the outward direction is derived from the required Front A→B boundary bearing entered below.
Device compass
--°
Point the top of the phone straight outward from the front boundary. Keep away from steel, vehicles, electrical equipment and magnetic cases.
What does bearing mean?
N = 0°E = 90°S = 180°W = 270°
- Compass: face straight outward from the centre of the front boundary and record that direction.
- Google Earth / survey: if the front boundary bearing is measured left → right, add 90° to get the outward bearing.
- Take several readings and use one trusted bearing consistently for all floors.
2 Plot measurements
Enter the measurements shown on your site plan or survey.
Changing the unit converts all currently entered lengths, centre coordinates, gate dimensions and entered area.
Full theoretical front-side length up to the sharp corner, before any optional rounding.
Enter the depth at the non-rounded front corner. The opposite side is calculated automatically.
Advanced plot geometry — optional alternative
Use this only when the standard front/back workflow does not describe your four-sided plot.
Four side lengths alone do not uniquely define a quadrilateral; the diagonal fixes the shape.
Enter boundaries around the plot in order A→B front, B→C right, C→D back, D→A left. Bearings are compass bearings.
The front outward bearing is derived automatically from the front A→B bearing.
Coordinates may come from CAD or a survey. Enter A=front-left, B=front-right, C=back-right, D=back-left.
Rounded corners (optional)
Select any combination. Tangent is measured from the theoretical sharp corner along both adjoining sides.
Current limitation: advanced mode supports convex four-sided plots. Concave/L-shaped plots are intentionally rejected.
Optional plot details
Required only when a rounded corner is selected.
Used only to compare the registered area with the calculated geometry.
Gate calculator Optional
Distances on the front side are measured from its left end.
Uses the same unit as the plot dimensions.
Measured along the selected physical side from its stated start point.
The app finds a position where the centre of the gate falls inside this pada.
The entire opening must remain inside the continuous portion of these padas on the selected physical side.
SARVOI VASTU
Vastu Analysis Report
Property analysis
Property / Floor Plan
Visual adjustment only. These controls move or reshape the floor-plan image under the apartment boundary; the marked boundary, North direction and Vastu calculations stay unchanged.
Vastu Suggestions
Traditional planning guidance only. The geometry and measurements remain mathematical; the highlighted area is a separate Vastu interpretation layer.
Viewing and calculating are free. Basic SVG/PNG/PDF downloads require a free account. Advanced Reports are currently available free during the initial production launch and open the browser print dialog; choose “Save as PDF”.
32 pada lengths & split portions
A pada may cross a corner and occupy parts of two physical sides. The total and every side-specific contribution are shown.
| Pada | Angular range | Total length | Length on each physical side |
|---|
Physical-side pada breakdown
| Physical side | Pada | Length on this side |
|---|